Description
Detail
Photo-electric sensor, XUB, thru beam, laser, Sn 100m, 12..24VDC, M12. range of product: OsiSense XU – series name: Application material handling – electronic sensor type: photo-electric sensor – sensor name: XUB – detection system: thru beam – material: plastic – type of output signal: discrete – wiring technique: 3-wire.
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This photoelectric sensor in XUB cylindrical M18 design. It has a through beam detection system.
- · It supports nominal sensing distance of 100m with 1 normally opened or 1 normally closed programmable discrete output.
- · It is furnished with M12 male connector for electrical connection. This photoelectric sensor has red laser class 1 670 nm conforming to IEC 825-1 emission.
Specification
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Analogue output -10 V … +10 V : No
Analogue output 0 V … 10 V : No
Pre failure notice : No
With restart blockage : No
With time function : No
With monitoring function downstream switching devices : No
Suitable for safety functions : No
Ambient temperature : -40 – 70 °C
With other analogue output : No
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
AWG-number : 0
Number of contact energized outputs with signalling function : 0
Height of sensor : 0 mm
Number of protected contact energized outputs : 0
Min. reflector distance : 0 mm
Switching voltage of OSSD at state “high” : 0 V
Analogue output 4 mA … 20 mA : No
Reflector included : No
Analogue output 0 mA … 20 mA : No
With communication interface AS-Interface : No
With communication interface analogue : No
With communication interface CANOpen : No
With communication interface Ethernet : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface INTERBUS : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface SSD : No
With communication interface SSI : No
Scope of delivery of the one-way system : Transmitter and receiver
Material housing : Plastic
Type of electric connection : Connector M12
Construction type housing : Cylinder, screw-thread
Explosion safety category for dust : None
Laser protection class : Class 1
Explosion safety category for gas : None
Operation agent-safety class : Safety class 0
Material of optical surface : Plastic
Degree of protection (IP) : IP67
Type of switch function : Programmable/configurable
Setting procedure : Manual adjustment
Type of safety acc. IEC 61496-1 : 1
Type of switching output : PNP
Sensing mode : Dark switching
Type of light : Laser diode, red light
Voltage type : DC
Max. switching distance : 100000 mm
Number of protected semiconductor outputs : 1
Diameter sensor : 18 mm
Max. output current at protected output : 100 mA
Switching frequency : 1500 Hz
Rated switching distance : 100000 mm
Max. output current : 100 mA
Number of semiconductor outputs with signalling function : 1
Wavelength of the sensor : 670 nm
Opening angle : 0 °
Light dot : 0 mm²
Transmission range of the safety field : 0 m
Length of sensor : 0 mm
Time of reaction : 0.4 ms
Width sensor : 0 mm
