Description
Detail
Schneider Electric ATV212HU55N4 Altivar 212 5.5kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 12A
- · Height: 184mm
- · Range: Altivar 212
- · Width: 142mm
- · Weight: 3.35kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 150mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for EtherNet/IP : No
Supporting protocol for KNX : No
Supporting protocol for TCP/IP : No
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : No
Supporting protocol for other bus systems : Yes
Supporting protocol for MODBUS : Yes
Supporting protocol for Data-Highway : No
Supporting protocol for LON : Yes
Supporting protocol for DeviceNet : No
Supporting protocol for SERCOS : No
Supporting protocol for SUCONET : No
With control unit : Yes
Supporting protocol for DeviceNet Safety : No
Supporting protocol for CAN : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for PROFIsafe : No
With PC connection : Yes
Supporting protocol for SafetyBUS p : No
4-quadrant operation possible : No
Integrated breaking resistance : No
Application in domestic- and commercial area permitted : Yes
Application in industrial area permitted : Yes
Supporting protocol for PROFINET IO : No
Number of HW-interfaces industrial Ethernet : 0
Type of converter : I converter
Number of phases input : 3
Mains frequency : 50/60 Hz
Degree of protection (IP) : IP21
Number of HW-interfaces parallel : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces other : 0
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces USB : 0
Number of HW-interfaces serial TTY : 0
Relative symmetric net voltage tolerance : 0 %
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces RS-422 : 0
Number of phases output : 3
Max. output at quadratic load at rated output voltage : 0 kW
Width : 142 mm
Depth : 150 mm
Height : 184 mm
Nominal output current I2N : 12 A
Max. output frequency : 200 Hz
Max. output at linear load at rated output voltage : 5.5 kW
Max. output voltage : 480 V
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
With optical interface : No
Supporting protocol for INTERBUS : No
