Description
Detail
Schneider 1 Phase compact synchronous/asynchronous motors variable speed drive built specifically for complex machines. This starter is assembled with a heat sink included as well as an integrated bypass function. The display on this soft starter features 1 green LED (signalling CANopen run) and 2 red LEDs (1 signalling CANopen error, 1 signalling drive fault).
- · Motor power: 1.1kW heavy duty
- · Asynchronous motor control profile: Flux vector control (standard/energy saving), Voltage/Frequency ratio (2 points/5 points/energy saving)
- · Synchronous motor control profile: Vector control without sensor
- · Operating position: Vertical +/- 10°
- · Screw clamp terminals: 0.5 – 1.5mm² (control), 2.5 – 4mm² (motor/power supply)
- · Vibration resistance: 1gn
- · Shock resistance: 15gn
- · Supply frequency: 50 – 60Hz
- · Ambient operating temperature: -10°C to 50°C
- · IP20 Degree of protection
Specification
With control unit : Yes
Mains voltage : 200 – 240 V
Supporting protocol for KNX : No
Supporting protocol for INTERBUS : No
Supporting protocol for MODBUS : Yes
Supporting protocol for TCP/IP : No
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : Yes
Supporting protocol for CAN : Yes
With optical interface : No
Supporting protocol for other bus systems : Yes
Supporting protocol for Data-Highway : No
Supporting protocol for LON : No
Supporting protocol for SERCOS : No
Supporting protocol for DeviceNet : Yes
Supporting protocol for SUCONET : No
Max. output at quadratic load at rated output voltage : 0 kW
Supporting protocol for DeviceNet Safety : No
Supporting protocol for INTERBUS-Safety : No
With PC connection : Yes
Supporting protocol for PROFINET CBA : No
Supporting protocol for EtherNet/IP : Yes
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for PROFINET IO : Yes
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFIsafe : No
Application in industrial area permitted : Yes
4-quadrant operation possible : Yes
Application in domestic- and commercial area permitted : Yes
Integrated breaking resistance : No
Relative symmetric net voltage tolerance : 10 %
Number of phases input : 1
Degree of protection (IP) : IP20
Mains frequency : 50/60 Hz
Depth : 158 mm
Number of HW-interfaces RS-485 : 1
Number of analogue outputs : 1
Weight : 1600 g
Max. output at linear load at rated output voltage : 1.1 kW
Width : 105 mm
Height : 142 mm
Number of HW-interfaces other : 1
Depth : 158 mm
Number of digital outputs : 3
Number of HW-interfaces industrial Ethernet : 1
Number of phases output : 3
Width : 105 mm
Max. output voltage : 240 V
Relative symmetric net frequency tolerance : 5 %
Number of analogue inputs : 3
Height : 188 mm
Max. output frequency : 599 Hz
Number of digital inputs : 7
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-422 : 0
Number of interfaces PROFINET : 0
Nominal output current I2N : 6.9 A
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-232 : 0
