Description
Detail
Schneider Electric ATV212HU75N4 Altivar 212 7.5kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 16A
- · Height: 232mm
- · Range: Altivar 212
- · Width: 180mm
- · Weight: 6.45kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 170mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
With PC connection : Yes
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : No
Supporting protocol for other bus systems : Yes
Supporting protocol for INTERBUS : No
Supporting protocol for TCP/IP : No
Supporting protocol for Data-Highway : No
Supporting protocol for MODBUS : Yes
With control unit : Yes
Supporting protocol for SUCONET : No
Supporting protocol for DeviceNet : No
Supporting protocol for SERCOS : No
Supporting protocol for LON : Yes
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for KNX : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for PROFIsafe : No
4-quadrant operation possible : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for Foundation Fieldbus : No
Application in domestic- and commercial area permitted : Yes
Supporting protocol for PROFINET IO : No
Integrated breaking resistance : No
Application in industrial area permitted : Yes
Number of HW-interfaces industrial Ethernet : 0
Number of phases input : 3
Type of converter : I converter
Mains frequency : 50/60 Hz
Degree of protection (IP) : IP21
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces USB : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces RS-232 : 0
Relative symmetric net voltage tolerance : 0 %
Number of interfaces PROFINET : 0
Number of phases output : 3
Number of HW-interfaces other : 0
Depth : 170 mm
Nominal output current I2N : 16 A
Width : 180 mm
Height : 232 mm
Max. output voltage : 480 V
Max. output frequency : 200 Hz
Max. output at linear load at rated output voltage : 7.5 kW
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
With optical interface : No
Supporting protocol for CAN : No
