Description
Detail
Schneider Electric ATV212WD37N4 Altivar 212 37kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 79A
- · Height: 880mm
- · Range: Altivar 212
- · Width: 284mm
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 343mm
- · IP Rating: IP55
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for MODBUS : Yes
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : No
Supporting protocol for CAN : No
With optical interface : No
Supporting protocol for INTERBUS : No
Supporting protocol for LON : Yes
Supporting protocol for DeviceNet : No
Supporting protocol for SERCOS : No
Supporting protocol for SUCONET : No
Supporting protocol for other bus systems : Yes
With control unit : Yes
Supporting protocol for EtherNet/IP : No
Supporting protocol for Data-Highway : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for Foundation Fieldbus : No
With PC connection : Yes
Supporting protocol for DeviceNet Safety : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for PROFIsafe : No
4-quadrant operation possible : No
Supporting protocol for PROFINET IO : No
Supporting protocol for SafetyBUS p : No
Integrated breaking resistance : No
Application in domestic- and commercial area permitted : Yes
Application in industrial area permitted : Yes
Max. output at quadratic load at rated output voltage : 0 kW
Type of converter : I converter
Degree of protection (IP) : IP55
Number of phases input : 3
Mains frequency : 50/60 Hz
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces parallel : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces other : 0
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces USB : 0
Relative symmetric net voltage tolerance : 0 %
Number of HW-interfaces industrial Ethernet : 0
Number of phases output : 3
Depth : 343 mm
Width : 284 mm
Number of HW-interfaces RS-422 : 0
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 37 kW
Nominal output current I2N : 79 A
Height : 880 mm
Max. output frequency : 200 Hz
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
Supporting protocol for TCP/IP : No
Supporting protocol for KNX : No
