Description
Detail
Schneider Electric ATV212HD22N4 Altivar 212 22kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 43.5A
- · Height: 420mm
- · Range: Altivar 212
- · Width: 240mm
- · Weight: 26.4kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 214mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for PROFINET IO : No
Supporting protocol for TCP/IP : No
Supporting protocol for KNX : No
Supporting protocol for PROFIBUS : No
Supporting protocol for MODBUS : Yes
Supporting protocol for Data-Highway : No
Supporting protocol for CAN : No
Supporting protocol for other bus systems : Yes
Supporting protocol for DeviceNet : No
With control unit : Yes
Supporting protocol for SUCONET : No
Supporting protocol for SERCOS : No
Supporting protocol for LON : Yes
With PC connection : Yes
Supporting protocol for ASI : No
4-quadrant operation possible : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for Foundation Fieldbus : No
Application in domestic- and commercial area permitted : Yes
Supporting protocol for PROFIsafe : No
Application in industrial area permitted : Yes
Integrated breaking resistance : No
Number of HW-interfaces RS-422 : 0
Number of phases output : 3
Number of phases input : 3
Degree of protection (IP) : IP21
Type of converter : I converter
Number of HW-interfaces parallel : 0
Number of HW-interfaces industrial Ethernet : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces other : 0
Number of HW-interfaces USB : 0
Number of HW-interfaces serial TTY : 0
Relative symmetric net voltage tolerance : 0 %
Number of HW-interfaces RS-485 : 1
Mains frequency : 50/60 Hz
Max. output at quadratic load at rated output voltage : 0 kW
Depth : 214 mm
Width : 240 mm
Height : 420 mm
Max. output frequency : 200 Hz
Nominal output current I2N : 43.5 A
Max. output at linear load at rated output voltage : 22 kW
Max. output voltage : 480 V
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
With optical interface : No
Supporting protocol for INTERBUS : No
