Schneider ATV12H075M2TQ VSD 1Ph 0.75kW
£206.72 inc VAT £172.27 ex VAT
Description
Detail
Specification
Supporting protocol for PROFINET CBA : No
Supporting protocol for MODBUS : Yes
Supporting protocol for PROFIBUS : No
Supporting protocol for CAN : No
With optical interface : No
Supporting protocol for INTERBUS : No
Supporting protocol for Data-Highway : No
Supporting protocol for SERCOS : No
Supporting protocol for DeviceNet : No
Supporting protocol for LON : No
Supporting protocol for SUCONET : No
Supporting protocol for other bus systems : No
With control unit : Yes
Supporting protocol for EtherNet/IP : No
Supporting protocol for ASI : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for PROFINET IO : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for DeviceNet Safety : No
With PC connection : Yes
Supporting protocol for PROFIsafe : No
Supporting protocol for SafetyBUS p : No
4-quadrant operation possible : No
Integrated breaking resistance : No
Application in domestic- and commercial area permitted : Yes
Application in industrial area permitted : Yes
Max. output at linear load at rated output voltage : 0.75 kW
Number of phases input : 1
Degree of protection (IP) : IP20
Mains frequency : 50/60 Hz
Number of HW-interfaces USB : 0
Type of converter : I converter
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces parallel : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces other : 0
Number of HW-interfaces industrial Ethernet : 0
Relative symmetric net voltage tolerance : 0 %
Number of phases output : 3
Number of HW-interfaces RS-485 : 1
Max. output at quadratic load at rated output voltage : 0 kW
Height : 130 mm
Depth : 131.2 mm
Max. output voltage : 240 V
Max. output frequency : 400 Hz
Nominal output current I2N : 4.2 A
Width : 72 mm
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 200 – 240 V
Supporting protocol for TCP/IP : No
Supporting protocol for KNX : No
