Inductive sensor XS5 M8, L33mm, stainless, Sn1,5mm, 12..24VDC, M12 0,1

£87.78 inc VAT £73.15 ex VAT

Description

Detail

Inductive sensor XS5 M8, L33mm, stainless, Sn1,5mm, 12..24VDC, M12 0,15m. range of product: OsiSense XS – series name: general purpose – sensor type: inductive proximity sensor – device application: – – sensor name: XS5 – sensor design: cylindrical M8 – size: 33 mm – body type: fixed – material: metal – type of output signal: discrete – wiring technique: 2-wire – output circuit type: DC – cable length: 0.15 m.

Specification

  • Number of protected contact energized outputs : 0
  • Number of semiconductor outputs with signalling function : 1
  • Max. output current at protected output : 100 mA
  • Length of sensor : 33 mm
  • Switching frequency : 4000 Hz
  • Diameter sensor : 8 mm
  • Height of sensor : 0 mm
  • Width sensor : 0 mm
  • Number of contact energized outputs with signalling function : 0
  • Number of protected semiconductor outputs : 1
  • Rated control supply voltage Us at AC 50HZ : 0 – 0 V
  • Rated control supply voltage Us at AC 60HZ : 0 – 0 V
  • Rated control supply voltage Us at DC : 12 – 24 V
  • Supply voltage : 12 – 24 V
  • Cascadable : No
  • Suitable for safety functions : No
  • With monitoring function downstream switching devices : No
  • Compression-resistant : No
  • Type of switch function : Normally open contact
  • Voltage type : DC
  • Type of electric connection : Connector M12
  • Type of interface for safety communication : None
  • Mechanical mounting condition for sensor : Concise
  • Type of switching output : Two-wire
  • Explosion safety category for dust : None
  • Explosion safety category for gas : None
  • Type of actuation : Metallic Target
  • Material housing : Metal
  • Construction type housing : Cylinder, screw-thread
  • SIL according to IEC 61508 : None
  • Type of interface : None
  • Performance level acc. EN ISO 13849-1 : None
  • Interference resistance to magnetic fields : Immune against magnetic DC-field
  • Category according to EN 954-1 : 1
  • Switching distance : 1.5 mm