Description
Detail
Variable speed drive ATV12, 0,55 kW, 0,75hp, 200..240V, 1ph, on base plate. range of product: Altivar 12 – product or component type: variable speed drive – product destination: asynchronous motors – assembly style: on base plate – component name: ATV12 – quantity per set: set of 1 – EMC filter: integrated – built-in fan: without – network number of phases: 1 phase – line current: 6.7 A 240 V, 8 A 200 V – asynchronous motor control profile: quadratic voltage/frequency ratio, sensorless flux vector control, voltage/frequency ratio (V/f) – noise level: 0 dB.
Specification
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : No
Supporting protocol for CAN : No
Supporting protocol for KNX : No
Supporting protocol for LON : No
Supporting protocol for MODBUS : Yes
With control unit : Yes
Supporting protocol for SERCOS : No
Supporting protocol for DeviceNet : No
Supporting protocol for SUCONET : No
Supporting protocol for other bus systems : No
Supporting protocol for Data-Highway : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for TCP/IP : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for PROFINET IO : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFIsafe : No
With PC connection : Yes
4-quadrant operation possible : No
Integrated breaking resistance : No
Application in domestic- and commercial area permitted : Yes
Application in industrial area permitted : Yes
Width : 72 mm
Number of phases output : 3
Number of phases input : 1
Mains frequency : 50/60 Hz
Degree of protection (IP) : IP20
Depth : 102.2 mm
Max. output at linear load at rated output voltage : 0.55 kW
Number of HW-interfaces RS-485 : 1
Height : 143 mm
Relative symmetric net voltage tolerance : 10 %
Max. output voltage : 230 V
Max. output frequency : 400 Hz
Nominal output current I2N : 3.5 A
Relative symmetric net frequency tolerance : 5 %
Type of converter : I converter
Number of HW-interfaces other : 8
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-232 : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces industrial Ethernet : 0
Number of HW-interfaces USB : 0
Max. output at quadratic load at rated output voltage : 0 kW
Mains voltage : 200 – 240 V
With optical interface : No
Supporting protocol for INTERBUS : No
