Description
Detail
Standard digital output kit STB, 24 V DC, 6 O. range of product: Modicon STB distributed I/O solution – product or component type: standard digital output kit – kit composition: STBDDO3600 module, STBXBA1000 base, STBXTS1100, 6-terminal screw type connector, STBXTS2100, 6-terminal spring clamp connector.
Specification
Supporting protocol for DeviceNet : Yes
Wall mounting/direct mounting : No
Radio standard Bluetooth : No
Supporting protocol for other bus systems : No
Fieldbus connection over separate bus coupler possible : Yes
Front build in possible : No
Appendant operation agent (Ex ia) : No
System accessory : Yes
Supporting protocol for SUCONET : No
Supporting protocol for LON : No
Supporting protocol for EtherNet/IP : Yes
Supporting protocol for SERCOS : No
Rack-assembly possible : Yes
Supporting protocol for Data-Highway : No
Supporting protocol for INTERBUS : Yes
Supporting protocol for CAN : Yes
Short-circuit protection, outputs available : Yes
Supporting protocol for TCP/IP : Yes
Supporting protocol for PROFIBUS : Yes
Supporting protocol for SafetyBUS p : No
Radio standard GSM : No
Radio standard GPRS : No
IO link master : No
Supporting protocol for PROFIsafe : No
Digital outputs configurable : Yes
Digital inputs configurable : No
Radio standard UMTS : No
Appendant operation agent (Ex ib) : No
Supporting protocol for ASI : No
Supporting protocol for PROFINET IO : No
Supporting protocol for PROFINET CBA : No
Rail mounting possible : No
Supporting protocol for AS-Interface Safety at Work : No
Radio standard WLAN 802.11 : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for Foundation Fieldbus : No
Degree of protection (IP) : IP20
Number of digital outputs : 6
Width : 128.3 mm
Height : 13.9 mm
Number of HW-interfaces Wireless : 0
Number of HW-interfaces RS-422 : 0
Output current : 0.5 A
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-485 : 0
Number of HW-interfaces USB : 0
Depth : 70 mm
SIL according to IEC 61508 : None
Category according to EN 954-1 : 1
Type of output voltage : DC
Voltage type of supply voltage : DC
Performance level acc. EN ISO 13849-1 : None
Type of voltage (input voltage) : DC
Explosion safety category for dust : None
Explosion safety category for gas : None
Supply voltage AC 50 Hz : 0 – 0 V
With optical interface : No
Supporting protocol for MODBUS : Yes
Supporting protocol for KNX : No
Suitable for safety functions : No
Time delay at signal exchange : 0.715 – 0.955 ms
Supply voltage AC 60 Hz : 0 – 0 V
Supply voltage DC : 24 – 24 V
Permitted voltage at output : 24 – 24 V
Type of electric connection : Screw connection
Permitted voltage at input : 0 – 0 V
Number of HW-interfaces industrial Ethernet : 0
Number of HW-interfaces RS-232 : 0
Input current at signal 1 : 0 mA
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces other : 0
Number of digital inputs : 0
