Description
Detail
Schneider Electric ATV212WU15N4 Altivar 212 1.5kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 2 IEC 61800-5-1 pollution degree.
- · Current Rating: 3.7A
- · Height: 297mm
- · Range: Altivar 212
- · Width: 215mm
- · Weight: 7kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 192mm
- · IP Rating: IP55
- · Supply Voltage: 380 to 480V
Specification
With PC connection : Yes
Supporting protocol for INTERBUS : No
With optical interface : No
Supporting protocol for TCP/IP : No
Supporting protocol for ASI : No
Supporting protocol for Data-Highway : No
Supporting protocol for MODBUS : Yes
With control unit : Yes
Supporting protocol for SERCOS : No
Supporting protocol for DeviceNet : No
Supporting protocol for SUCONET : No
Supporting protocol for LON : Yes
Supporting protocol for other bus systems : Yes
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for KNX : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFINET IO : No
4-quadrant operation possible : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for PROFIsafe : No
Supporting protocol for Foundation Fieldbus : No
Integrated breaking resistance : No
Application in industrial area permitted : Yes
Application in domestic- and commercial area permitted : Yes
Number of HW-interfaces other : 0
Mains frequency : 50/60 Hz
Number of phases output : 3
Type of converter : I converter
Number of phases input : 3
Number of HW-interfaces parallel : 0
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces USB : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces serial TTY : 0
Relative symmetric net voltage tolerance : 0 %
Number of interfaces PROFINET : 0
Number of HW-interfaces industrial Ethernet : 0
Degree of protection (IP) : IP55
Depth : 192 mm
Number of HW-interfaces RS-485 : 1
Width : 215 mm
Nominal output current I2N : 3.7 A
Max. output at linear load at rated output voltage : 1.5 kW
Height : 297 mm
Relative symmetric net frequency tolerance : 5 %
Max. output frequency : 200 Hz
Max. output voltage : 480 V
Mains voltage : 380 – 480 V
Supporting protocol for PROFIBUS : No
Supporting protocol for CAN : No
