Description
Detail
Schneider Electric ATV212WD45N4C Altivar 212 45kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 94A
- · Height: 880mm
- · Range: Altivar 212
- · Width: 284mm
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 343mm
- · IP Rating: IP55
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for EtherNet/IP : No
Supporting protocol for TCP/IP : No
Supporting protocol for ASI : No
Supporting protocol for CAN : No
Supporting protocol for KNX : No
With control unit : Yes
Supporting protocol for MODBUS : Yes
Supporting protocol for Data-Highway : No
Supporting protocol for LON : Yes
Supporting protocol for DeviceNet : No
Supporting protocol for SUCONET : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for other bus systems : Yes
Supporting protocol for SERCOS : No
Supporting protocol for INTERBUS : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for PROFINET CBA : No
4-quadrant operation possible : No
Supporting protocol for PROFINET IO : No
With PC connection : Yes
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFIsafe : No
Integrated breaking resistance : No
Application in domestic- and commercial area permitted : Yes
Application in industrial area permitted : Yes
Number of HW-interfaces other : 0
Type of converter : I converter
Number of phases output : 3
Number of phases input : 3
Mains frequency : 50/60 Hz
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-422 : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces RS-232 : 0
Number of interfaces PROFINET : 0
Relative symmetric net voltage tolerance : 0 %
Degree of protection (IP) : IP55
Width : 284 mm
Number of HW-interfaces industrial Ethernet : 0
Depth : 343 mm
Max. output voltage : 480 V
Height : 880 mm
Max. output frequency : 200 Hz
Nominal output current I2N : 94 A
Max. output at linear load at rated output voltage : 45 kW
Mains voltage : 380 – 480 V
Relative symmetric net frequency tolerance : 5 %
Supporting protocol for PROFIBUS : No
With optical interface : No
