Description
Detail
Schneider Electric ATV212HU15N4 Altivar 212 1.5kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 2 IEC 61800-5-1 pollution degree..
- · Current Rating: 3.7A
- · Height: 143mm
- · Range: Altivar 212
- · Width: 107mm
- · Weight: 2kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 150mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for PROFIBUS : No
Supporting protocol for INTERBUS : No
Supporting protocol for DeviceNet : No
Supporting protocol for LON : Yes
Supporting protocol for TCP/IP : No
Supporting protocol for SUCONET : No
Supporting protocol for MODBUS : Yes
Supporting protocol for KNX : No
Supporting protocol for Data-Highway : No
With control unit : Yes
Supporting protocol for SERCOS : No
Supporting protocol for other bus systems : Yes
4-quadrant operation possible : No
Supporting protocol for ASI : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for EtherNet/IP : No
With PC connection : Yes
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFIsafe : No
Integrated breaking resistance : No
Application in domestic- and commercial area permitted : Yes
Supporting protocol for PROFINET IO : No
Application in industrial area permitted : Yes
Number of HW-interfaces RS-485 : 1
Number of phases output : 3
Degree of protection (IP) : IP21
Type of converter : I converter
Number of phases input : 3
Number of HW-interfaces parallel : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces industrial Ethernet : 0
Number of HW-interfaces other : 0
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces USB : 0
Relative symmetric net voltage tolerance : 0 %
Mains frequency : 50/60 Hz
Max. output at quadratic load at rated output voltage : 0 kW
Height : 143 mm
Depth : 150 mm
Width : 107 mm
Max. output at linear load at rated output voltage : 1.5 kW
Nominal output current I2N : 3.7 A
Max. output frequency : 200 Hz
Max. output voltage : 480 V
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
With optical interface : No
Supporting protocol for CAN : No
