Description
Detail
Schneider Electric ATV212HD45N4 Altivar 212 45kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 94A
- · Height: 550mm
- · Range: Altivar 212
- · Width: 240mm
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 244mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for EtherNet/IP : No
Supporting protocol for ASI : No
Supporting protocol for Data-Highway : No
Supporting protocol for LON : Yes
Supporting protocol for SUCONET : No
Supporting protocol for MODBUS : Yes
Supporting protocol for CAN : No
Supporting protocol for INTERBUS : No
Supporting protocol for DeviceNet : No
Supporting protocol for KNX : No
Supporting protocol for INTERBUS-Safety : No
With control unit : Yes
4-quadrant operation possible : No
Supporting protocol for AS-Interface Safety at Work : No
With optical interface : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for SERCOS : No
Supporting protocol for other bus systems : Yes
With PC connection : Yes
Supporting protocol for PROFINET IO : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for PROFIsafe : No
Application in industrial area permitted : Yes
Supporting protocol for SafetyBUS p : No
Supporting protocol for Foundation Fieldbus : No
Application in domestic- and commercial area permitted : Yes
Integrated breaking resistance : No
Number of HW-interfaces industrial Ethernet : 0
Mains frequency : 50/60 Hz
Number of phases input : 3
Type of converter : I converter
Degree of protection (IP) : IP21
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces parallel : 0
Number of HW-interfaces RS-422 : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces RS-232 : 0
Relative symmetric net voltage tolerance : 0 %
Number of interfaces PROFINET : 0
Number of phases output : 3
Number of HW-interfaces other : 0
Depth : 244 mm
Width : 240 mm
Height : 550 mm
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 45 kW
Relative symmetric net frequency tolerance : 5 %
Nominal output current I2N : 94 A
Max. output frequency : 200 Hz
Mains voltage : 380 – 480 V
Supporting protocol for PROFIBUS : No
Supporting protocol for TCP/IP : No
