Description
Detail
Schneider Electric ATV212HD37N4 Altivar 212 37kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 79A
- · Height: 550mm
- · Range: Altivar 212
- · Width: 240mm
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 244mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for DeviceNet Safety : No
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : No
Supporting protocol for Data-Highway : No
Supporting protocol for CAN : No
Supporting protocol for INTERBUS : No
Supporting protocol for KNX : No
Supporting protocol for MODBUS : Yes
With control unit : Yes
Supporting protocol for SERCOS : No
Supporting protocol for DeviceNet : No
Supporting protocol for SUCONET : No
Supporting protocol for other bus systems : Yes
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for TCP/IP : No
Supporting protocol for PROFINET IO : No
Supporting protocol for PROFINET CBA : No
With PC connection : Yes
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFIsafe : No
4-quadrant operation possible : No
Integrated breaking resistance : No
Application in industrial area permitted : Yes
Application in domestic- and commercial area permitted : Yes
Number of HW-interfaces industrial Ethernet : 0
Number of phases output : 3
Type of converter : I converter
Number of phases input : 3
Number of HW-interfaces parallel : 0
Degree of protection (IP) : IP21
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-422 : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces RS-485 : 1
Number of interfaces PROFINET : 0
Relative symmetric net voltage tolerance : 0 %
Mains frequency : 50/60 Hz
Number of HW-interfaces other : 0
Depth : 244 mm
Width : 240 mm
Height : 550 mm
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 37 kW
Nominal output current I2N : 79 A
Relative symmetric net frequency tolerance : 5 %
Max. output frequency : 200 Hz
Mains voltage : 380 – 480 V
With optical interface : No
Supporting protocol for LON : Yes
