Description
Detail
Schneider Electric ATV212HD30N4 Altivar 212 30kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 58.5A
- · Height: 420mm
- · Range: Altivar 212
- · Width: 240mm
- · Weight: 26.4kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 214mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
4-quadrant operation possible : No
Supporting protocol for Data-Highway : No
Supporting protocol for CAN : No
Supporting protocol for KNX : No
Supporting protocol for ASI : No
Supporting protocol for MODBUS : Yes
Supporting protocol for INTERBUS : No
Supporting protocol for DeviceNet : No
Supporting protocol for SERCOS : No
With control unit : Yes
Supporting protocol for SUCONET : No
Supporting protocol for LON : Yes
Supporting protocol for DeviceNet Safety : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for PROFIBUS : No
With PC connection : Yes
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for other bus systems : Yes
Supporting protocol for PROFINET IO : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for PROFINET CBA : No
Integrated breaking resistance : No
Supporting protocol for PROFIsafe : No
Application in industrial area permitted : Yes
Application in domestic- and commercial area permitted : Yes
Number of HW-interfaces industrial Ethernet : 0
Mains frequency : 50/60 Hz
Number of phases input : 3
Number of phases output : 3
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Degree of protection (IP) : IP21
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-485 : 1
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces RS-232 : 0
Number of interfaces PROFINET : 0
Relative symmetric net voltage tolerance : 0 %
Type of converter : I converter
Number of HW-interfaces other : 0
Depth : 214 mm
Height : 420 mm
Width : 240 mm
Max. output at linear load at rated output voltage : 30 kW
Max. output voltage : 480 V
Nominal output current I2N : 58.5 A
Max. output frequency : 200 Hz
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
With optical interface : No
Supporting protocol for TCP/IP : No
