Description
Detail
Schneider Electric ATV212HD18N4 Altivar 212 18.5kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 2 IEC 61800-5-1 pollution degree..
- · Current Rating: 37A
- · Height: 330mm
- · Range: Altivar 212
- · Width: 245mm
- · Weight: 11.65kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 190mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for ASI : No
Supporting protocol for other bus systems : Yes
Supporting protocol for PROFIBUS : No
Supporting protocol for INTERBUS : No
Supporting protocol for TCP/IP : No
Supporting protocol for Data-Highway : No
Supporting protocol for MODBUS : Yes
Supporting protocol for SUCONET : No
With control unit : Yes
Supporting protocol for DeviceNet : No
Supporting protocol for SERCOS : No
Supporting protocol for LON : Yes
With PC connection : Yes
Supporting protocol for KNX : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for PROFIsafe : No
4-quadrant operation possible : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for Foundation Fieldbus : No
Application in domestic- and commercial area permitted : Yes
Supporting protocol for PROFINET IO : No
Integrated breaking resistance : No
Application in industrial area permitted : Yes
Number of HW-interfaces RS-422 : 0
Number of phases output : 3
Type of converter : I converter
Number of phases input : 3
Degree of protection (IP) : IP21
Number of HW-interfaces RS-485 : 1
Number of interfaces PROFINET : 0
Number of HW-interfaces parallel : 0
Number of HW-interfaces industrial Ethernet : 0
Number of HW-interfaces other : 0
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces USB : 0
Relative symmetric net voltage tolerance : 0 %
Mains frequency : 50/60 Hz
Max. output at quadratic load at rated output voltage : 0 kW
Width : 245 mm
Height : 330 mm
Nominal output current I2N : 37 A
Depth : 190 mm
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 18.5 kW
Relative symmetric net frequency tolerance : 5 %
Max. output frequency : 200 Hz
With optical interface : No
Mains voltage : 380 – 480 V
Supporting protocol for CAN : No
