Inductive sensor XS7 40x40x15, PBT, Sn15mm, 12..24VDC, M8

£69.97 inc VAT £58.31 ex VAT

Description

Detail

Inductive sensor XS7 40x40x15, PBT, Sn15mm, 12..24VDC, M8. range of product: OsiSense XS – series name: general purpose – sensor type: inductive proximity sensor – device application: – – sensor name: XS7 – size: 15 mm – body type: fixed – material: plastic – type of output signal: discrete – wiring technique: 3-wire – output circuit type: DC.

  • · This XS flat (40 x 40 x 15 mm) inductive proximity sensor has a PBT case.
  • · It has a supply voltage of 12V to 24V DC.
  • · This general purpose flat inductive proximity sensor is mountable directly on a surface, thanks to its 4 screw fixing points.
  • · It provides mechanical resistance and chemical withstand thanks to PBT case.
  • · It has a yellow LED for output status indication for easier sensor setup and troubleshooting.

Specification

  • Rated control supply voltage Us at AC 60HZ : 0 – 0 V
  • Number of protected semiconductor outputs : 1
  • Length of sensor : 15 mm
  • Max. output current at protected output : 100 mA
  • Height of sensor : 40 mm
  • Width sensor : 40 mm
  • Diameter sensor : 0 mm
  • Number of contact energized outputs with signalling function : 0
  • Number of protected contact energized outputs : 0
  • Switching distance : 15 mm
  • Rated control supply voltage Us at DC : 12 – 24 V
  • Supply voltage : 12 – 24 V
  • Rated control supply voltage Us at AC 50HZ : 0 – 0 V
  • Suitable for safety functions : No
  • Cascadable : No
  • With monitoring function downstream switching devices : No
  • Compression-resistant : No
  • Interference resistance to magnetic fields : Immune against magnetic DC-field
  • Material housing : Plastic
  • Type of electric connection : Connector M8
  • Explosion safety category for gas : None
  • Type of interface for safety communication : None
  • Mechanical mounting condition for sensor : Concise
  • Explosion safety category for dust : None
  • Type of switch function : Normally open contact
  • Type of interface : None
  • Voltage type : DC
  • Type of switching output : PNP
  • Type of actuation : Metallic Target
  • Category according to EN 954-1 : 1
  • Performance level acc. EN ISO 13849-1 : None
  • SIL according to IEC 61508 : None
  • Switching frequency : 1000 Hz
  • Number of semiconductor outputs with signalling function : 1